Nomar Equipment

Pin and Bushings ?

feeds@yuku.com (tator) — Tue, 26 Aug 2008 19:59:39 GMT

Want to rebuild the pivot on my 12 80 where should I start looking for parts?
Bud

Wrecker bed info

feeds@yuku.com (mixrdrivr) — Tue, 01 Jul 2008 03:14:00 GMT

Does anyone have any info on an old nomar model 25 b?

Getting Parts

feeds@yuku.com (myerstowing) — Wed, 25 Jun 2008 00:44:25 GMT

DOES Dualtech sell parts for nomar beds such as frame froks, wheellifts, ect?

EX-NO-MAR employee

feeds@yuku.com (fixnomar) — Tue, 27 May 2008 13:59:04 GMT

Heres a can of worms I thought I just would open;

Just thought everyone would like to know, I am an ex-employee of NO-MAR. I worked there for 10 years and still have a wealth of knowledge still stuck in my brain, so don't be afraid to ask me a question or two. I worked in the engineering office with one of the greatest Mechanical Engs. I have had the pleasure to work with. I am curious for those that might know, where did all the plans/prints go after the sale? You can let me...

Bent Boom 2nd stage NoMar T1214 14 ton 1/2" cable

feeds@yuku.com (AutoHaus1) — Sun, 20 Apr 2008 04:54:36 GMT

Folks,
The inside end of the 2nd stage boom is bent, the outside 4 feet are straight, however the inside 4 feet, has a 1/2" deflection in the 4' run and the upper wear plate support is bent down about 1" and it is only 1 foot long . Our local pipe and supply Co. thinks he can straighten it. So I removed the boom section to drop it off at there shop. If that doesn't work out,...

Need help quick, tail light question

feeds@yuku.com (firemedic) — Wed, 26 Mar 2008 22:45:09 GMT

Does anyone know where I can buy the tail lights for a Nomar 1015. One of my lenses got broke. It says on the back of the lens, TMC Glo-Brite M 1235 X. It is actually 2 pieces that form one light. If anyone knows of a lights that will fit, I would take that too.

NOMAR T810 Should i buy

feeds@yuku.com (Moremph) — Wed, 12 Mar 2008 01:30:08 GMT

I know where a Nomar T810 body is sitting the guy wants 3000 or 3500 for it. The bed was on a truck that was used to move cars around a gm plant. The boom has like 0hrs on it but i am sure the wheel lift needs rebuilt. The bed sides are trashed, It would need new skins etc. Can i get parts for this thing or would it be all custom fab?

Thanks Travis

how much

feeds@yuku.com (jhook52) — Tue, 01 Jan 2008 13:23:48 GMT

looking to buy a heavy duty truck a guy has a 91 pete with a 3035 nomar its fully equipped with every thing u would need chains,straps, forks, etc. truck is very clean looking for a ball park price . thanks mike

Nomar 12d24 Navy bed New condition

feeds@yuku.com (towrecovery) — Sun, 23 Dec 2007 13:44:28 GMT

Can someone tell me what ton bed this is ? What size winches are on this bed ? I ran...

t4545 nomar bed

feeds@yuku.com (joshua23) — Fri, 21 Dec 2007 15:32:09 GMT

need to find somone who has specs for a t4545 no-mar bed

No mar 1215 Under lift Speed

feeds@yuku.com (firemedic) — Thu, 06 Dec 2007 10:49:41 GMT

Is there a way to speed up the movement on the under lift on a No mar 1215? The one I purchased yesterday, at high idle everything is fine,but the under lift. On high idle, the winches move good (haven't tried using both at the same time yet), the boom up and down and in and out is fine. The fold down on the under lift, and the extend in and out are pretty slow.

I have heard you can make adjustments, but on what? And do you sacrifice strength for speed?

u/r for a nomar 12d24

feeds@yuku.com (paul windsor) — Sun, 18 Nov 2007 21:05:40 GMT

just got this truck n need a u/r its a old int from wv was a army truck short w/base only 172'' only need it to tow school bus n motor homes thanks paul

Safety chains on nomar 30 ton

feeds@yuku.com (Oldtoweqp) — Thu, 20 Sep 2007 21:58:29 GMT

I just bought a Nomar 30 ton hyraulic and was wondering where you guys with these units attach your safety chains on towtruck being that there are no safety chain slots ? I have been using the lower attatchment points on the tailboard and didnt know if there was a better way.

hyd pump specs?? T2025

feeds@yuku.com (carco21) — Thu, 20 Sep 2007 15:12:23 GMT

Have a No-Mar T2025, 1992 vintage, but no paper work. I have looked at the hyd pump, a stacked dual pump unit on the transmission, but see no markings or tags to ID the brand, let alone the capacity. I'm curious as to the pumps specs, pressure capacity, volumn of oil flow, and @ what rpm. I know there could be different pump however your best guess will suffice. Any ideas or suggestions?? Thank you. bob...............

No Mar Boom Exstensions

feeds@yuku.com (WreckMan0920) — Thu, 13 Sep 2007 22:13:27 GMT

I have for sale 4 complete sets of boom exstension these fit the no mar booms and holmes these where used to recover indy cars i can send pics if interested or call me @ 419-295-2885 or 137*137444*17........................thanks

No-Mar H.D.

feeds@yuku.com (Robert Millsaps) — Wed, 12 Sep 2007 15:31:39 GMT

Can anyone tell me if parts are still available for No-Mar heavy duty wreckers. If so, how far back are parts available. I've heard that No-Mar's are no longer being made but had also heard that another company had bought their tooling. If so, maybe parts are still available. I appreicate any info you can offer, Thanks Robert

NO MAR 12D24

feeds@yuku.com (kevin windsor) — Mon, 13 Aug 2007 22:48:36 GMT

Does anybody know where I can get info on this wrecker? I'm looking at purchasing it and would like to know some specs.

no mar 3035 info

feeds@yuku.com (ATR1) — Thu, 19 Jul 2007 13:50:52 GMT

other than what happened to rod anybody have any input they want to share about a 93 model 30 ton intergrated nomar cause we are thinkin bout buyin one in the next few days its between that and a 50 35 but there is a big price difference (the no more is cheaper a lot)

Removing a T3035 bed and toolboxes

feeds@yuku.com (towman37) — Sun, 01 Jul 2007 00:21:29 GMT

Anyone know how difficult it is to remove a T3035 bed and tool boxes?? Our's is mounted on a T800 KW and is a triple axle. I had heard once before that this was the only tri-axle that No-Mar ever put together, maybe I'm wrong!! Anyways, the frame is tripled through the middle and has a bad sag to it. We need to take the bed off to repair the frame! Any help would be greatly appreciated.

Matt Jarma
Temple, TX

pivit pin replacement/repair

feeds@yuku.com (Rod Midkiff) — Wed, 13 Jun 2007 04:48:32 GMT
our 35ton nomar is in need of work on the pivit pin (have not opened it up yet..)..

I want to get input from anyone who has had their's apart as to any tricks.. and / or (avoid this or that will happen) type input..

thanks

Rod