looking for comments on a scorpion....

feeds@yuku.com (GregTowzIt) — Mon, 14 Jul 2008 16:43:41 GMT

we are considering a scorpion bed. anyone care to send brags/bitches??

Miller Time / Tator Time

feeds@yuku.com (James Shaefer) — Mon, 07 Jul 2008 13:17:31 GMT

Could have used a smaller truck but if ya got it , why not use it. Please pay cash & ill buy Bud. This Cyclone is still For Sale and I love working it untill it is sold.

AATAC TITAN 32 TROUBLES

feeds@yuku.com (mariotow) — Tue, 13 May 2008 16:25:39 GMT

has anyone else out there purchased a aatac titan 32 wrecker.please let us know.we have experienced terrible failures with the unit we purchased installed by the aatac factory on our new cab and chassis.

Pickin and Swingin #39,130

feeds@yuku.com (ole750) — Wed, 30 Apr 2008 18:37:22 GMT

A friend had a coil at his place and we decided to play around a bit so this is what we done last saturday. We picked it on the passenger side and rotated it around the tail board to the drivers side. The Coil weighed #39,130 and was documented by the bill of lading. We used a cable sling through the eye with protection on the corners rated at 56,000 and 2 12 ton snatch blocks with a 4 part line each line rated at 14,500
So we were within our limits and we had no problem pickin and...

LOOKING FOR USED TATOR

feeds@yuku.com (TBar1117) — Fri, 25 Apr 2008 19:50:45 GMT

We are impressed with the AATAC tators. The boss is looking for a used 50 ton. If anyone has one for sale e-mail pics and specs to WRECKMASTERFRED@AOL.COM.

more cyclone

feeds@yuku.com (PineTree25) — Thu, 24 Apr 2008 02:53:34 GMT

Told truck was in ditch. Need your big wrecker, maybe you should bring two. This is what we found. The tank broke loose at the frt. Cut back loose and brought truck out. Tank had 2000 gal of brine water. Rolled tank to pump off water and lifted out and brought it around to load on their trailer. Towed truck to dealer and off loaded tank beside truck. Was a little more to it, but that was it.

New Cyclone For Sale

feeds@yuku.com (James Shaefer) — Mon, 14 Apr 2008 08:29:32 GMT

08 -- Cyclone -- 00 Ftl -- Cum 600 HP -- 18 Spd -- Triple Frame -- Call Jim @ 715-743-4800

Need Parts

feeds@yuku.com (towmanjc) — Sat, 05 Apr 2008 19:02:44 GMT

I hope Aatac can come thur with the parts we need for our wreckers..It did`nt sound to promising on the phone..

cyclone 100 wheel lift question.

feeds@yuku.com (automedics) — Sun, 16 Mar 2008 19:28:29 GMT

Hello, we just purchased our cyclone 100, and was wondering how many of yo use your wheel lift set-up.
I used it for a rear tow on a semi, and the main frame of the lift assembly was touching the track arms on the rear end. I had the bars in the outer holes, and I will experiment with bar location on our tractor this week. Other than that it worked perfectly, and I'm sure it is something to get to know. This is a nice machine, and the best part is I can still tow with it, as it is...

crane work

feeds@yuku.com (PineTree25) — Mon, 25 Feb 2008 21:36:37 GMT

A local factory seen our truck in the paper doing a recovery and called to see if we could or would move a press. We said sure!! We took this off a trailer that backed in the building and placed in the spot where they are going to rebuild it. The plant manager is going to have us load some other machines and move a couple other things. If things keep going maybe we will be adding another AATAC ROTATOR before fall. They said it's weight was 35,680 lbs. It is some kind of stamping machine?...

cyclone action

feeds@yuku.com (PineTree25) — Sat, 16 Feb 2008 22:23:45 GMT

This is from a truck that lost it's load. 6" steel bars. We loaded what fell off along the ramp and then reloaded the next day on another trailer the company sent. Then we loaded the damaged trailer on a different trailer for the company to haul back to their yard for repair. The Tator worked great and is the best investment we have made. Thanks to all the AATAC crew for building such a value...

Titan 32's

feeds@yuku.com (towingtech) — Sun, 10 Feb 2008 22:47:41 GMT

Hey, I operate a Titan 32 in Canada's north.

Does any one else have any pics of theirs.

Cyclone, and letter to a friend.

feeds@yuku.com (Jimmyaatac) — Sat, 09 Feb 2008 11:04:48 GMT

I recently sent this letter to someone who seems to always post negative comments about AATAC. I have never met the man, but from what I hear he is a good person so I felt that I needed to vent my opinion.

To all the customers: Thank you for all your support, it is a pleasure to work with you and we will continue to provide you with excellent towing...

2 below 0

feeds@yuku.com (PineTree25) — Mon, 28 Jan 2008 00:57:19 GMT

Truck worked great, didn't complain once about being to cold. Took a day and half to get feeling back in my hands. 6 plus hours. Truck was over 250 feet from road

Aluminum bed??????

feeds@yuku.com (ed barker) — Sat, 19 Jan 2008 15:09:07 GMT

I would like to get a response to this from Aatac as to whether they have any future plans of making an aluminum bed for their heavy units,,,my thoughts are as good as of a product as you have if it were to have the aluminum bed it would be far superior,we don't all live in the south or the west,some of us have rust issues to deal with.I know you are making stainless beds now but thats just not the same as aluminum,weight wise,,,paint prep,,etc,,I am curious if this is in the near future....

Question about removing wheellift recievers?

feeds@yuku.com (Turbo Transport) — Thu, 17 Jan 2008 02:42:59 GMT

I tried to use my fork recievers but I couldn't figure out how to remove the wheellift recievers on my Aatac 1202. they have something locking them on so they don't fall off when they reach the end. I ended up slinging the truck because it was just going the the wrecking yard but I would like to figure out if there is a trick to removing the wheellift recievers.

Tator Chassis

feeds@yuku.com (James Shaefer) — Fri, 11 Jan 2008 18:12:13 GMT

2000 Ftl -- Shaefer Spec -- 600 HP -- 18 Spd -- Headed to Factory for Rotator -- Hope to have it ready by Mid February - Buy it NOW and it is not to late to make some changes to this order. Thanks -- Call Jim @ 715-743-4800

aatac underreach

feeds@yuku.com (1RANDY) — Tue, 08 Jan 2008 13:39:46 GMT

Just asking how you guys like the lift on the aatac rotator, I don't believe I have ever heard anybody say if it was good,bad or other wise. What are the spec on the lift?

1st Action

feeds@yuku.com (PineTree25) — Sat, 05 Jan 2008 13:58:03 GMT

First Pics

feeds@yuku.com (PineTree25) — Sat, 29 Dec 2007 04:37:06 GMT

Aatac Equipment